Who’s up for a little recycled engineering! We love turning trash into treasure, especially treasure that moves. This post will show you how to make a Toilet Paper Roll Balloon Car. With just a few supplies and a bit of recycling, you’ll be rolling in no time.
What is a Machine?
This project is a perfect opportunity to learn about simple machines, the building blocks of all things that move. Here are the six types of simple machines:
Lever: A stiff board that rests on a center turning point called a fulcrum that is used to lift objects. Think teeter-totter.
- Wheel and axle: A wheel with a rod attached to the middle that can help lift objects. Think bicycle.
- Pulley: Adds a rope to a wheel which allows you to change the direction of a force. Think flagpole or window blinds.
- Inclined plane: A hard, flat surface with one end higher than the other. Aids in moving objects. Think slide.
- Wedge: Two inclined planes put together and helps push objects apart. Think ax.
- Screw: An inclined plane wrapped around a pole that can lift objects or hold them together. Think screw.
- Toilet paper rolls
- Masking tape
- Paper straws
- Bamboo skewers
- Glue gun
- Rubber band
- Cut 4 circles approximately 1 1/2” in diameter out of the cardboard. A good way to cut a circle is to find something round and the right size that you can trace around.
- Adults, this is a good step for you to do for safety. Grab the bamboo skewer and poke a hole in the center of each cardboard circle. Then cut the bamboo skewer into two 4” pieces.
- Cut two 3” pieces of a paper straw. Tape onto the toilet paper roll. These will hold your wheel axles.
- Cut a 5” piece of a paper straw. Grab the balloon and place it over the neck to the end of the straw. Wrap the rubber band around the neck of the balloon and straw until secure. Then tape the straw to the top of the toilet paper roll.
- Blow up the balloon and let the toilet paper roll balloon car roll! Does it move the way you expected? What’s giving it a boost?
If your car isn’t wheeling smoothly, check that the air can flow through the straw well. It’s easy to shut off the airflow if you don’t wrap the rubber band well. Also, check to see that the wheels can turn freely. Try rolling the car without balloon power and make corrections if necessary.